Article 11 of the Ecodesign Regulation lists who must have free and easy access to a digital product passport: customers, manufacturers, importers, distributors, dealers, professional repairers, independent operators, refurbishers, remanufacturers, recyclers, market surveillance authorities, customs authorities, civil society organisations, trade unions and other relevant actors. More than a dozen named groups, and the list is open. The same article says each of them gets access "on the basis of their respective access rights set out in the delegated act". For textiles, furniture and every other ESPR group, that act does not exist yet. So the question "who sees which field" has a legal answer for the list of readers and no legal answer yet for the fields. This article is about the space in between: what the Commission, the JRC and the standards bodies have already written, and how to build a passport today that will not have to be torn down when the acts arrive.
What the regulation settles, and what it delegates
Three provisions of Regulation (EU) 2024/1781 carry the whole subject.
- Article 10(1)(g): access to the data in the passport is regulated by the essential requirements of Articles 10 and 11 and by "the specific access rights at product group level" in the delegated act adopted under Article 4. The regulation does not define a single public field. It defines the mechanism.
- Article 11(b): the groups above must have access free of charge and easily, according to those rights. Note who is on the list: not only authorities and recyclers, but independent operators, civil society organisations and trade unions. A passport built on the assumption that "restricted means authorities only" is already narrower than the law.
- Article 11(f) and (g): the rights to introduce, modify or update data are limited according to the same access rights, and authentication, reliability and integrity of the data must be ensured. Reading and writing are two different permissions, and both are supposed to be provable.
Two more sentences matter. Article 10(1)(e) forbids storing customers' personal data in the passport without their explicit consent, which is why the consumer layer must work anonymously. And the last paragraphs of Article 11 empower the Commission to adopt implementing acts on "the procedures for issuing and verifying digital credentials" of the entities with access rights. That is the future mechanism by which a market surveillance officer or a recycler will prove who they are. As of 19 November 2026 no such act has been adopted. Nobody can issue a legally recognised "recycler credential" today, including us.
What the Commission FAQ adds
The Commission's FAQ of December 2025, which we translated and commented on in August, does not add rights, but it fixes three expectations that any implementation should respect.
- Question 3: access is by scanning the data carrier or, later, through a public web portal, and "each group, manufacturer, consumer, repairer, recycler, authority, gets what it has a right to access". The FAQ treats the layered model as given, not as an option.
- Question 16: general access is anonymous. Whatever a consumer sees must be visible without registration, without an app and without login. This is also a requirement of two harmonised standards, as we wrote in the provider checklist.
- Question 22: voluntary data are allowed, but must be clearly distinguished from mandatory data. A layer is not the same thing as a label; a public field can be voluntary and a restricted field can be mandatory.
The FAQ also repeats, in Question 19, that the EU registry stores no product data and only links an identifier to the location of the passport. The registry knows which passports exist. It does not know who is allowed to read what, and Implementing Regulation (EU) 2026/1778 gives it no such role.
The only field-by-field map that exists: iron and steel
The JRC preparatory study for the first ESPR product act, iron and steel, is the only official document that assigns an access level to every proposed data point. We took it apart in August. The proposal uses three tiers: public information; information restricted to notified bodies, market surveillance authorities, customs and the Commission; and information available only to parties with a legitimate interest, the example given being recyclers. The declared carbon footprint value sits in the public tier, while the calculation parameters sit behind legitimate interest, because inputs and assumptions can reveal commercial details.
Two things follow for anyone outside steel. First, the middle tier is where the money and the disputes are: composition details, supplier names, process data. Second, "legitimate interest" is undefined in the study and in the FAQ, and the battery access act that was due on 18 August 2026 exists only as a draft of 19 October, which lists roles but not how anyone proves one. The steel proposal inherits a category whose definition is still empty. Textiles will inherit it from steel.
The standard that will carry the rules: EN 18239
Of the eight European standards written for the passport, six were cited in the Official Journal on 15 July 2026. The remaining two, EN 18239 on access rights, security and confidentiality, and EN 18246 on data authentication and integrity, were published by CEN on 16 September 2026, two months after the formal vote closed on 16 July. On 19 November 2026 neither was cited in the Official Journal, so neither gives a presumption of conformity yet.
Until 18239 is cited, there is no harmonised way to express "this field is for recyclers" in a machine-readable form that another system would understand. A vendor who tells you their role model is "compliant with EN 18239" should be able to say which edition they mean, the 2026 publication or the 2025 draft, and should not promise a presumption of conformity before the citation.
How to build it today without inventing law
The honest design has three properties, and none of them requires an act.
- One public layer that needs nothing. Everything a consumer is meant to see opens from the QR code in a browser, anonymously. Composition, care, origin, durability, documents, identification. This is the layer that will be checked first by anyone, including a market surveillance officer with a phone.
- Restricted layers stored separately from the public snapshot. Not hidden by a CSS class, not present in the HTML source. If the restricted data are in the page, they are public, whatever the interface pretends. The machine-readable output should say that restricted layers exist, without exposing their content.
- Access that is logged and explained. Since nobody can issue legal credentials yet, the only defensible interim rule is: a reader identifies themselves, the read is recorded, and the page says plainly that roles will come with the act. Anything stronger is theatre; anything weaker is a leak.
What we did with our own passports
We sell passports, so read this paragraph knowing that. In September we added two restricted layers to the passport builder, next to the public data. The supervisory layer holds the fields an inspector asks for first: the number of the declaration of conformity, the notified body if one was involved, the internal production batch reference, where the technical documentation is kept and who is the compliance contact. The recycler layer holds the detailed composition with disassembly notes, hazardous substances with their location in the product, how the materials separate, and a contact for take-back. Both layers are published to a separate store, the public page shows the tabs only when a layer exists, reading requires a signed-in account, every read is counted per day, and the page says in one sentence that this is an interim arrangement until the delegated act and EN 18239 define roles. The public JSON lists the layer names and nothing else.
What we deliberately did not do: we did not invent a "verified recycler" badge, we did not make the middle tier public by default, and we did not put the restricted fields in the HTML and hide them with a button.
What to do this week
- Sort your fields into three piles: public, for authorities, for legitimate interest. Use the steel map as a template even if you make jackets; the categories of information are the same.
- Ask your provider one question: are the restricted fields absent from the public page source, or merely hidden? View the source of a passport they host. It takes a minute.
- Write down who inside your company may edit each pile. Article 11(f) will eventually require it; today it is just good hygiene.
- Do not wait for credentials to publish the public layer. The consumer layer is the one with a deadline; the restricted layers can be filled in before the act without being exposed.
FAQ
Is there any legal list of "public" fields for textiles today?
No. The textile delegated act has not been adopted. The JRC textile study proposes data points and the steel study proposes access levels, but both are proposals. Anyone quoting a definitive list is quoting a draft.
Can I simply make everything public and skip layers?
For voluntary passports, yes, as long as you do not publish personal data or trade secrets you cannot take back later. For mandatory passports the act will decide, and some fields will be restricted whether you like it or not.
Does the registry control who reads my passport?
No. The registry links the identifier to the passport's location and verifies the economic operator. Access to fields is enforced by whoever hosts the passport.
Does the battery passport work the same way?
The battery regulation has its own access rules in Article 77 and its own overdue act on "legitimate interest", published as a draft on 19 October 2026. The mechanics are similar, the legal basis is different, and nothing in the ESPR FAQ transfers to batteries.
What happens to my interim role model when the act arrives?
If your layers are stored separately, mapping them to legal roles is a configuration change. If they were hidden in the public page, you rebuild the passport.


